KD ELEGANCE metal fire doors are a high-quality product that is manufactured in accordance with the highest quality standards. The door leaf is flush with the forend of the metal KD frame. The doors are easy to install and safe to use. They are characterised by elegant smooth lines. Silicone seals ensure smooth and silent closing.

The surface protection of KD ELEGANCE doors is a powder coating layer selected according to the customer’s wishes. The basic selection of coating colours is based on the RAL colour chart.

We manufacture doors to order, so they can be adapted to your openings and wishes.

Faculty of Chemistry and Chemical Technology, Ljubljana

Possible features of KD ELEGANCE fire doors based on their intended use:

• fire resistance (EI₂30, EI₂60, EI₂90, EI₂120),
• fire glazing in leaf and/or fanlight (EI₂30, EI₂60),
• resistance to smoke leakage (S_a),
• soundproofing (39 dB),
• thermal transmittance (U_D = 0.86 ÷ 1.2 W/m²K),
• air permeability on contact surfaces (Class 3),
• protection against radiation (X-ray)

EQUIPMENT ON KD ELEGANCE DOORS

KD ELEGANCE fire doors are intended for installation at the boundaries of fire and/or smoke control sections, as well as for installation on escape routes. They are suitable for:

• entrance doors in apartments and hotel rooms,
• doors on industrial or business premises,
• doors on escape routes,
• doors on outer walls,
• doors in power stations,
• doors in facilities with special requirements (hospitals ...). 

By selecting the tunnel KD frame, the KD ELEGANCE door can be installed flush with the wall.

KD ELEGANCE DOOR MODELS

The purpose of a fire door is to prevent a fire spreading from one section to another and to enable the safe evacuation of people from the building.

Determining the classification of fire doors:

• Integrity (E): the ability of an element to prevent the passage of flames or hot gases. When the element is exposed to fire, cracks or openings should not appear.
• Insulation (I): the ability of an element to prevent the excessive transition of heat by conduction. Elements must be manufactured from materials that are thermal insulators. 
  Insulation I₂:
  - average increase in temperature is 140˚C or less;
  - maximum increase in temperature on leaf is 180°C or less;
  - maximum increase in temperature on frame is 360°C or less;
• Time in minutes (30, 60, 90, 120), representing the time the criteria are fulfilled during the fire resistance test in accordance with the curve of a standard fire.

All KD ELEGANCE door models can be upgraded with radiation protection by special request.

RADIATION PROTECTION:

All KD ELEGANCE door models can be upgraded with radiation protection by special request.