The door frame for gypsum board walls can be single-piece or two-part. Both versions have a groove for sealing rubber. The important difference is in the door frame installation method. The single-piece door frame is mounted in conjunction with the construction of the gypsum board wall. The two-part door frame is mounted in an already existing opening in the gypsum board wall.
STANDARD EQUIPMENT:
- sealing rubber,
- subconstruction for the hinge,
- cut-out section for lock,
- subconstruction for bolting.
INSTALLATION:
KD.KN door frame specific features
|
|
KD. KN 1 0, KD. KN 1 1The KD KN basic door frame is made from a basic frame. It is equipped with a subconstruction for bolting to the construction of the gypsum board wall. The door frame is mounted in conjunction with the construction of the wall. By agreement, the bottom of the door frame can be extended by 30 mm and connected to the door angles, as well as marked with 0 for an easier determination of the height. PROTECTION: primer powder coating |
|
|
KD. KN 2 0, KD. KN 2 1The KD KN door frame with hidden bolts is made from a basic and a stop frame. The basic frame has a subconstruction for bolting in prefabricated walls, and the stop frame has a wedge for fitting to the basic frame. The door frame is mounted in an already existing opening in the gypsum board wall. Because the door frame is in two parts, it can be filled with polyurethane foam or stone wool for better thermal and noise insulation. PROTECTION:
|
|
|
KD. KN 3 0, KD. KN 3 1The KD KN non-rebated door frame is a single-piece door frame made from a basic frame. It is equipped with a subconstruction for bolting to the construction of the gypsum board wall. The door frame is mounted in conjunction with the construction of the wall. By agreement the bottom of the door frame can be extended by 30 mm and connected to the door angles, as well as marked with 0 for an easier determination of the height. The door frame does not have a groove for a seal and is intended for the protection of openings in passages or for combining with sliding doors on walls. PROTECTION: primer powder coating |
MODELS KD.KN:
| Basic model 1 0 | Basic model - 1 1 |
| Model with hidden bolts 2 0 | Model with hidden bolts - 2 1 |
| Non-rebated model - 3 0 | Non-rebated model - 3 1 |
