The drywall construction metal door frame is a two-part door frame consisting of a basic and a stop frame. The door frame has a groove for a seal.
KD SM is the most universal door frame suitable for installation in all wall types. It is installed when the walls are already painted and on finished floors. Its basic version is fixed in the opening with polyurethane foam.
The door frame is highly customisable for different wall thicknesses since the stop profile can be configured within − 0 mm and + 25 mm from the basic dimension of the door frame. They can be equipped with holes for bolting, but cover caps are visible in those places.
STANDARD EQUIPMENT:
- subconstruction for hinge,
- cut-out section for lock striking plate,
- wedges for fitting the stop frame.
PROTECTION:
- powder coating with a colour from the RAL colour chart
INSTALLATION:
KD.SM door frame specific features
|
|
KD.SM 1 0, KD.SM 1 1The door frame has a groove for a seal. It is suitable for all types of leaves (metal, wood ...). Its dimensions can be adjusted along its height, width, and with regards to the thickness of the wall. |
|
|
KD.SM 2 0, KD.SM 2 1The subconstruction of the door frame is adapted for bolting into the wall. When it is assembled together with the stop profile, the bolts are concealed. Because of the strong subconstruction for bolting, the door frame can be filled with stone wool which helps achieve better thermal and sound insulation. |
|
|
KD.SM 3 0, KD.SM 3 1The door frame does not have a groove for a seal, so it is suitable for the protection of openings in passages or for combining with sliding doors that are mounted on a wall. |
|
|
KD.SM 4 0, KD.SM 4 1The door frame is suitable for installation in walls thicker than 300 mm which you do not wish to cover completely. The rear part of the door frame is not finalised and needs to be finalised with a gypsum board panel or decorative mask, which can be manufactured from various materials, e.g. metal, wood, stone, ceramics, etc. |
|
|
KD.SM 5 0The extension for KD.SM door frames is suitable for use with walls of a greater thickness, from 350 mm onwards. It can be upgraded with a greater number of segments. It is always finalised with a stop profile. |
MODELS KD.SM:
